+86 15753219207
  QINGDAO-ANTAI

LPG Gas Cylinder Blasting



  • QGN40  LPG gas cylinder  inside shot blasting machine
  • QGN40  LPG gas cylinder  inside shot blasting machine
  • QGN40  LPG gas cylinder  inside shot blasting machine
  • QGN40  LPG gas cylinder  inside shot blasting machine
  • QGN40  LPG gas cylinder  inside shot blasting machine
QGN40  LPG gas cylinder  inside shot blasting machineQGN40  LPG gas cylinder  inside shot blasting machineQGN40  LPG gas cylinder  inside shot blasting machineQGN40  LPG gas cylinder  inside shot blasting machineQGN40  LPG gas cylinder  inside shot blasting machine

QGN40 LPG gas cylinder inside shot blasting machine

  • Model】:
  • Application】:
  • Characteristics】:LPG gas cylinder inside shot blasting machine
Product Description

Equipment working principles and working procedures

1. Sealed enclosed chamber: The sealed enclosed chamber is a welded structure, which forms an effective space for cleaning and sealing the workpiece. The inner wall of the attached room is composed of a multi-layer polyurethane board to form a labyrinth protection, which can be easily replaced. There is a sealed hair row at the mouth of the attached room. The sealed projectile effect is ideal, and no projectiles fly out. The upper part of the enclosed enclosure is also provided with a dust removal port, which is adjusted to a slight negative pressure in the attached chamber through a butterfly valve to ensure that the equipment does not overflow with dust. Two sealed chambers, one sealed chamber is fixed at one end, the other sealed chamber can move in the axial direction, respectively seal the front and rear ports of the cylinder, and fix the front and back ports of the cylinder at the same time
2. Turning system: The turning system of steel cylinder mainly consists of base, slewing bearing, high-pressure oil cylinder, hydraulic system, etc. After the shot blasting of the steel cylinder is completed by the two sets of spray guns within the specified time, the plug cylinder automatically blocks the opening of the end of the projectile discharge cylinder, and is driven by a high-pressure cylinder, including the rotation device, the base, the mobile seal chamber, and the fixed cylinder mechanism. At the same time, the protection mechanism holds the bottle tightly and prevents it from overturning. After reaching the stipulated position, the cylinder of the board automatically opens the bottle mouth and starts to discharge the projectile. At the same time, the bottom sand removal and dust cover starts to deal with the spilled dust.
3. Cylinder rotation device: The cylinder rotation device fully considers factors such as cylinder diameter, length, weight, projectile recovery efficiency, and safe operation. The rotation device adopts double-row sprocket transmission, and the cylinder rotation speed can be adjusted by frequency conversion. The two ends of the steel cylinder are fixed in the sealed room spray gun. The trolley moves at a specified speed, and the cylinder rotates through the sprocket transmission. The rotation speed is controlled by frequency conversion according to the diameter of the cylinder.
4. Hydraulic system: The hydraulic system is mainly composed of five parts: motor, oil pump, oil cylinder, various control valves, auxiliary components and hydraulic oil.
5. High-efficiency shot blasting system: The spray gun adopts advanced projectile acceleration area, the material of the spray rod is 1Cr12 or 3Cr13, and this equipment is equipped with two sets of high-efficiency double gun shot blasters. It has the function of automatic feeding. The spray gun can realize automatic control, and can control the nozzle to spray shot or jet. This can be used to remove floating dust on the working surface after the cleaning is completed. Equipped with a high-performance oil-water separator to ensure that the shot blasting tank uses dry air.
6. Shot blasting system: two sets of shot blasting systems are used, and each set of two spray guns enters from the bottle mouths at both ends respectively, and the speed of entry can be controlled by frequency conversion. , The cylinder can rotate, and can adjust the speed by frequency conversion. At the same time, the sealing problem of the spray rod and the bottle mouth is considered. The standard size of the spray rod is selected;


1.We can design and produce for our customer according to the cleaning requirements of workpiece.

2.Our machine advantages:advanced design, reasonable structure ,low-power consumption and perfect efficiency.

3.Our main market : worldwide,South-east,Middle-east ,Europe and South America.

4.Our shot blasting spare parts are high quality.Blaster can reach uttermost long-life , environmental protection, high efficiency in service. The material, durability:


Our Service

1.Equipment painting completed before shipment, With Stretch film to avoid rub off the surface paint, It can used wooden cases packaging according to users requirements.(Key parts such as electric cabinet with shockproof packaging material and then packed in wooden cases. )

2. We have 15 experienced engineers, With 108 skilled workers insure good quality of our machines and prompt delivery.
3.Meanwhile our company has a long-term cooperation with ACL, CSCL, CCNI, CNC, COSCO etc insure the goods to the port on time.

Our Company
1.All design adopt 3D Design. The first company in Qingdao adopts all three dimensional design.
2.All adopt general parts, easy to buy and replace.
3.International certification: CE,ISO14001,ISO9001,TUV,BV.
4.Domestic certificate:AAA corporate certificate(The first AAA enterprise in Qingdao);
5.Issued by Qingdao Municipality:Certificate of High and New Technology Enprise;
6.Issued by Qingdao Municipality: Certificate of Confidence and Trustworthiness;(There has never been a legal dispute.
Packing & Delivery

1.Equipment painting completed before shipment, With Stretch film to avoid rub off the surface paint, It can used wooden cases packaging according to users requirements.(Key parts such as electric cabinet with shockproof packaging material and then packed in wooden cases. )
2. We have 15 experienced engineers, With 108 skilled workers insure good quality of our machines and prompt delivery.
3.Meanwhile our company has a long-term cooperation with ACL, CSCL, CCNI, CNC, COSCO etc insure the goods to the port on time.

FAQ
If the machine is not suitable for your workpiece, please tell us the following infromation:

1)     What kind of workpiece will you clean?
2)    The size of workpieces(length, width and height of maximum  workpiece,Length, width and      height of minimum workpiece?)
3)     How many  the weight of maximum and minimum workpiece?
4)     Please tell us your requirement cleaning efficiency?

According to your infomation, the most suitable machines will be designed for your workpieces.


Contact Us

Tel: +86-532-88138566
Mobile(Whatsapp): +86-15753219207
Wechat: QINGDAO-ANTAI
E-mail: Lan.ji@qdantai.com